GyverBME280

Lightweight BME280 I2C library for Arduino

Compatibility

Compatible with all Arduino platforms (using Arduino functions)

Content

Install
Initialization
Usage
Example
Versions
Bugs and feedback

Installation

The library can be found by the name GyverBME280 and installed via the library manager in:
- Arduino IDE
- Arduino IDE v2
- PlatformIO
Download library .zip archive for manual installation:
- Unzip and put in C:\Program Files (x86)\Arduino\libraries (Windows x64)
- Unzip and put in C:\Program Files\Arduino\libraries (Windows x32)
- Unpack and put in Documents/Arduino/libraries/
- (Arduino IDE) automatic installation from .zip: Sketch/Include library/Add .ZIP library… and specify the downloaded archive
Read more detailed instructions for installing libraries [here] (https://alexgyver.ru/arduino-first/#%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE% D0%B2%D0%BA%D0%B0_%D0%B1%D0%B8%D0%B1%D0%BB%D0%B8%D0%BE%D1%82%D0%B5%D0%BA)

Initialization

GyverBME280 bme;

Usage

boolbegin(void); // run with standard addresscatfish (0x76)
bool begin(uint8_t address); // run with address
bool isMeasuring(void); // returns true while the measurement is in progress
float readPressure(void); // read pressure in Pa
float readHumidity(void); // Read humidity in %
void oneMeasurement(void); // Take one measurement and go to sleep
float readTemperature(void); // Read temperature in degrees C

void setMode(uint8_tmode); // set the mode of operation
// modes:
NORMAL_MODE
FORCED_MODE

void setFilter(uint8_tmode); // change the filter factor. Call before begin
// coefficients:
FILTER_DISABLE
FILTER_COEF_2
FILTER_COEF_4
FILTER_COEF_8
FILTER_COEF_16

void setStandbyTime(uint8_tmode); // Change time between measurements. Call before begin
// modes:
STANDBY_500US
STANDBY_10MS
STANDBY_20MS
STANDBY_6250US
STANDBY_125MS
STANDBY_250MS
STANDBY_500MS
STANDBY_1000MS

void setHumOversampling(uint8_t mode); // Set up oversampling or disable humidity. Call before begin
void setTempOversampling(uint8_t mode); // Set up oversampling or disable temperature. Call before begin
void setPressOversampling(uint8_t mode); // Set up oversampling or disable pressure. Call before begin
// modes:
MODULE_DISABLE
OVERSAMPLING_1
OVERSAMPLING_2
OVERSAMPLING_4
OVERSAMPLING_8
OVERSAMPLING_16

Example

See examples for other examples!

/*
   A simple example showing the basic functions of measuring temperature, pressure and humidity
*/

#include <GyverBME280.h> // Including the library
GyverBME280 bme; // Create bme object

void setup() {
  Serial.begin(9600); // Start serial port
  bme.begin(); // If add. settings are not needed - initialize the sensor
}

void loop() {Serial.print("Temperature: ");
  Serial.print(bme.readTemperature()); // Print temperature in [*C]
  Serial.println("*C");

  Serial.print("Humidity: ");
  Serial.print(bme.readHumidity()); // Output humidity in [%]
  Serial.println("%");

  float pressure = bme.readPressure(); // Read pressure in [Pa]
  Serial.print("Pressure: ");
  Serial.print(pressure / 100.0F); // Display pressure in [hPa]
  Serial.print(" hPa , ");
  Serial.print(pressureToMmHg(pressure)); // Output pressure in [mmHg. pillar]
  Serial.println("mm hg");
  Serial.print("Altide: ");
  Serial.print(pressureToAltitude(pressure)); // Print height in [m a.s.l. seas]
  Serial.println("m");
  Serial.println("");
  delay(1000);
}

Versions

v1.3 - fixed bug when negative. temperature
v1.4 - split into h and cpp
v1.5 - added support for BMP280

Bugs and feedback

When you find bugs, create an Issue, or better, immediately write to the mail alex@alexgyver.ru The library is open for revision and your Pull Request's!