gogacoder/GyverBME280
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

upd

Browse Source
This commit is contained in:
Alex
2021-09-07 14:56:56 +03:00
parent df0090efa4
commit 7ce521bae1
4 changed files with 29 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+1
View File
@@ -123,6 +123,7 @@ void loop() {
## Версии ## Версии
- v1.3 - исправлена ошибка при отриц. температуре - v1.3 - исправлена ошибка при отриц. температуре
- v1.4 - разбил на h и cpp - v1.4 - разбил на h и cpp
- v1.5 - добавлена поддержка BMP280
<a id="feedback"></a> <a id="feedback"></a>
## Баги и обратная связь ## Баги и обратная связь
library.properties
+1 -1
View File
@@ -1,5 +1,5 @@
name=GyverBME280 name=GyverBME280
version=1.4 version=1.5
author=AlexGyver <alex@alexgyver.ru> author=AlexGyver <alex@alexgyver.ru>
maintainer=AlexGyver <alex@alexgyver.ru> maintainer=AlexGyver <alex@alexgyver.ru>
sentence=Light library for BME280 sensor sentence=Light library for BME280 sensor
src/GyverBME280.cpp
+26 -25
View File
@@ -3,7 +3,7 @@
/* ============ Utilities ============ */ /* ============ Utilities ============ */
float pressureToAltitude(float pressure) { float pressureToAltitude(float pressure) {
if(!pressure) return 0; // If the pressure module has been disabled return '0' if (!pressure) return 0; // If the pressure module has been disabled return '0'
pressure /= 100.0F; // Convert [Pa] to [hPa] pressure /= 100.0F; // Convert [Pa] to [hPa]
return 44330.0 * (1.0 - pow(pressure / 1013.25, 0.1903)); // Сalculate altitude return 44330.0 * (1.0 - pow(pressure / 1013.25, 0.1903)); // Сalculate altitude
} }
@@ -15,22 +15,23 @@ float pressureToMmHg(float pressure) {
/* ============ Setup & begin ============ */ /* ============ Setup & begin ============ */
bool GyverBME280::begin(void) { bool GyverBME280::begin(void) {
return GyverBME280::begin(0x76); return begin(0x76);
} }
bool GyverBME280::begin(uint8_t address) { bool GyverBME280::begin(uint8_t address) {
_i2c_address = address; _i2c_address = address;
/* === Start I2C bus & check BME280 === */ /* === Start I2C bus & check BME280 === */
Wire.begin(); // Start I2C bus Wire.begin(); // Start I2C bus
if(!GyverBME280::reset()) return false; // BME280 software reset & ack check if (!reset()) return false; // BME280 software reset & ack check
if(GyverBME280::readRegister(0xD0) != 0x60) return false; // Check chip ID uint8_t ID = readRegister(0xD0);
GyverBME280::readCalibrationData(); // Read all calibration values if (ID != 0x60 && ID != 0x58) return false; // Check chip ID (bme/bmp280)
readCalibrationData(); // Read all calibration values
/* === Load settings to BME280 === */ /* === Load settings to BME280 === */
GyverBME280::writeRegister(0xF2 , _hum_oversampl); // write hum oversampling value writeRegister(0xF2, _hum_oversampl); // write hum oversampling value
GyverBME280::writeRegister(0xF2 , GyverBME280::readRegister(0xF2)); // rewrite hum oversampling register writeRegister(0xF2, readRegister(0xF2)); // rewrite hum oversampling register
GyverBME280::writeRegister(0xF4 , ((_temp_oversampl << 5) | (_press_oversampl << 2) | _operating_mode)); // write temp & press oversampling value , normal mode writeRegister(0xF4, ((_temp_oversampl << 5) | (_press_oversampl << 2) | _operating_mode)); // write temp & press oversampling value , normal mode
GyverBME280::writeRegister(0xF5 , ((_standby_time << 5) | (_filter_coef << 2))); // write standby time & filter coef writeRegister(0xF5, ((_standby_time << 5) | (_filter_coef << 2))); // write standby time & filter coef
return true; return true;
} }
@@ -62,7 +63,7 @@ void GyverBME280::setPressOversampling(uint8_t mode) {
/* ============ Reading ============ */ /* ============ Reading ============ */
int32_t GyverBME280::readTempInt(void) { int32_t GyverBME280::readTempInt(void) {
int32_t temp_raw = GyverBME280::readRegister24(0xFA); // Read 24-bit value int32_t temp_raw = readRegister24(0xFA); // Read 24-bit value
if (temp_raw == 0x800000) return 0; // If the temperature module has been disabled return '0' if (temp_raw == 0x800000) return 0; // If the temperature module has been disabled return '0'
temp_raw >>= 4; // Start temperature reading in integers temp_raw >>= 4; // Start temperature reading in integers
@@ -76,18 +77,18 @@ int32_t GyverBME280::readTempInt(void) {
float GyverBME280::readTemperature(void) { float GyverBME280::readTemperature(void) {
int32_t temp_raw = GyverBME280::readTempInt(); int32_t temp_raw = readTempInt();
float T = (temp_raw * 5 + 128) >> 8; float T = (temp_raw * 5 + 128) >> 8;
return T / 100; // Return temperature in float return T / 100.0; // Return temperature in float
} }
float GyverBME280::readPressure(void) { float GyverBME280::readPressure(void) {
uint32_t press_raw = GyverBME280::readRegister24(0xF7); // Read 24-bit value uint32_t press_raw = readRegister24(0xF7); // Read 24-bit value
if (press_raw == 0x800000) return 0; // If the pressure module has been disabled return '0' if (press_raw == 0x800000) return 0; // If the pressure module has been disabled return '0'
press_raw >>= 4; // Start pressure converting press_raw >>= 4; // Start pressure converting
int64_t value_1 = ((int64_t)GyverBME280::readTempInt()) - 128000; int64_t value_1 = ((int64_t)readTempInt()) - 128000;
int64_t value_2 = value_1 * value_1 * (int64_t)CalibrationData._P6; int64_t value_2 = value_1 * value_1 * (int64_t)CalibrationData._P6;
value_2 = value_2 + ((value_1 * (int64_t)CalibrationData._P5) << 17); value_2 = value_2 + ((value_1 * (int64_t)CalibrationData._P5) << 17);
value_2 = value_2 + (((int64_t)CalibrationData._P4) << 35); value_2 = value_2 + (((int64_t)CalibrationData._P4) << 35);
@@ -109,12 +110,12 @@ float GyverBME280::readPressure(void) {
float GyverBME280::readHumidity(void) { float GyverBME280::readHumidity(void) {
Wire.beginTransmission(_i2c_address); // Start I2C transmission Wire.beginTransmission(_i2c_address); // Start I2C transmission
Wire.write(0xFD); // Request humidity data register Wire.write(0xFD); // Request humidity data register
if(Wire.endTransmission() != 0) return 0; if (Wire.endTransmission() != 0) return 0;
Wire.requestFrom(_i2c_address, 2); // Request humidity data Wire.requestFrom(_i2c_address, 2); // Request humidity data
int32_t hum_raw = ((uint16_t)Wire.read() << 8) | (uint16_t)Wire.read(); // Read humidity data int32_t hum_raw = ((uint16_t)Wire.read() << 8) | (uint16_t)Wire.read(); // Read humidity data
if (hum_raw == 0x8000) return 0; // If the humidity module has been disabled return '0' if (hum_raw == 0x8000) return 0; // If the humidity module has been disabled return '0'
int32_t value = (GyverBME280::readTempInt() - ((int32_t)76800)); // Start humidity converting int32_t value = (readTempInt() - ((int32_t)76800)); // Start humidity converting
value = (((((hum_raw << 14) - (((int32_t)CalibrationData._H4) << 20) - value = (((((hum_raw << 14) - (((int32_t)CalibrationData._H4) << 20) -
(((int32_t)CalibrationData._H5) * value)) +((int32_t)16384)) >> 15) * (((int32_t)CalibrationData._H5) * value)) +((int32_t)16384)) >> 15) *
(((((((value * ((int32_t)CalibrationData._H6)) >> 10) *(((value * (((((((value * ((int32_t)CalibrationData._H6)) >> 10) *(((value *
@@ -125,17 +126,17 @@ float GyverBME280::readHumidity(void) {
value = (value > 419430400) ? 419430400 : value; value = (value > 419430400) ? 419430400 : value;
float h = (value >> 12); float h = (value >> 12);
return h / 1024.0; // Return humidity in float return h / 1024.0; // Return humidity in float
} }
/* ============ Misc ============ */ /* ============ Misc ============ */
bool GyverBME280::isMeasuring(void) { bool GyverBME280::isMeasuring(void) {
return (bool)((GyverBME280::readRegister(0xF3) & 0x08) >> 3); // Read status register & mask bit "measuring" return (bool)((readRegister(0xF3) & 0x08) >> 3); // Read status register & mask bit "measuring"
} }
void GyverBME280::oneMeasurement(void) { void GyverBME280::oneMeasurement(void) {
GyverBME280::writeRegister(0xF4 , ((GyverBME280::readRegister(0xF4) & 0xFC) | 0x02)); // Set the operating mode to FORCED_MODE writeRegister(0xF4 , ((readRegister(0xF4) & 0xFC) | 0x02)); // Set the operating mode to FORCED_MODE
} }
GyverBME280::GyverBME280() {} GyverBME280::GyverBME280() {}
@@ -144,7 +145,7 @@ GyverBME280::GyverBME280() {}
/* = BME280 software reset = */ /* = BME280 software reset = */
bool GyverBME280::reset(void) { bool GyverBME280::reset(void) {
if(!GyverBME280::writeRegister(0x0E , 0xB6)) return false; if (!writeRegister(0x0E , 0xB6)) return false;
delay(10); delay(10);
return true; return true;
} }
@@ -154,7 +155,7 @@ bool GyverBME280::reset(void) {
uint32_t GyverBME280::readRegister24(uint8_t address) { uint32_t GyverBME280::readRegister24(uint8_t address) {
Wire.beginTransmission(_i2c_address); Wire.beginTransmission(_i2c_address);
Wire.write(address); Wire.write(address);
if(Wire.endTransmission() != 0) return 0x800000; if (Wire.endTransmission() != 0) return 0x800000;
Wire.requestFrom(_i2c_address, 3); Wire.requestFrom(_i2c_address, 3);
return (((uint32_t)Wire.read() << 16) | ((uint32_t)Wire.read() << 8) | (uint32_t)Wire.read()); return (((uint32_t)Wire.read() << 16) | ((uint32_t)Wire.read() << 8) | (uint32_t)Wire.read());
} }
@@ -165,7 +166,7 @@ bool GyverBME280::writeRegister(uint8_t address , uint8_t data) {
Wire.beginTransmission(_i2c_address); Wire.beginTransmission(_i2c_address);
Wire.write(address); Wire.write(address);
Wire.write(data); Wire.write(data);
if(Wire.endTransmission() != 0) return false; if (Wire.endTransmission() != 0) return false;
return true; return true;
} }
@@ -174,7 +175,7 @@ bool GyverBME280::writeRegister(uint8_t address , uint8_t data) {
uint8_t GyverBME280::readRegister(uint8_t address) { uint8_t GyverBME280::readRegister(uint8_t address) {
Wire.beginTransmission(_i2c_address); Wire.beginTransmission(_i2c_address);
Wire.write(address); Wire.write(address);
if(Wire.endTransmission() != 0) return 0; if (Wire.endTransmission() != 0) return 0;
Wire.requestFrom(_i2c_address , 1); Wire.requestFrom(_i2c_address , 1);
return Wire.read(); return Wire.read();
} }
@@ -184,7 +185,7 @@ void GyverBME280::readCalibrationData(void) {
/* first part request*/ /* first part request*/
Wire.beginTransmission(_i2c_address); Wire.beginTransmission(_i2c_address);
Wire.write(0x88); Wire.write(0x88);
if(Wire.endTransmission() != 0) return; if (Wire.endTransmission() != 0) return;
Wire.requestFrom(_i2c_address , 25); Wire.requestFrom(_i2c_address , 25);
/* reading */ /* reading */
CalibrationData._T1 = (Wire.read() | (Wire.read() << 8)); CalibrationData._T1 = (Wire.read() | (Wire.read() << 8));
src/GyverBME280.h
+1 -1
View File
@@ -10,6 +10,7 @@
Версии: Версии:
v1.3 - исправлена ошибка при отриц. температуре v1.3 - исправлена ошибка при отриц. температуре
v1.4 - разбил на h и cpp v1.4 - разбил на h и cpp
v1.5 - добавлена поддержка BMP280
*/ */
#ifndef GyverBME280_h #ifndef GyverBME280_h
@@ -103,7 +104,6 @@ private:
int16_t _H5; int16_t _H5;
int8_t _H6; int8_t _H6;
} CalibrationData; } CalibrationData;
}; };
float pressureToMmHg(float pressure); // Convert [Pa] to [mm Hg] float pressureToMmHg(float pressure); // Convert [Pa] to [mm Hg]