diff --git a/README_EN.md b/README_EN.md
new file mode 100644
index 0000000..c2008ba
--- /dev/null
+++ b/README_EN.md
@@ -0,0 +1,128 @@
+# GyverBME280
+Lightweight BME280 I2C library for Arduino
+
+### Compatibility
+Compatible with all Arduino platforms (using Arduino functions)
+
+## Content
+- [Install](#install)
+- [Initialization](#init)
+- [Usage](#usage)
+- [Example](#example)
+- [Versions](#versions)
+- [Bugs and feedback](#feedback)
+
+<a id="install"></a>
+## Installation
+- The library can be found by the name **GyverBME280** and installed via the library manager in:
+    - Arduino IDE
+    - Arduino IDE v2
+    - PlatformIO
+- [Download library](https://github.com/GyverLibs/GyverBME280/archive/refs/heads/main.zip) .zip archive for manual installation:
+    - Unzip and put in *C:\Program Files (x86)\Arduino\libraries* (Windows x64)
+    - Unzip and put in *C:\Program Files\Arduino\libraries* (Windows x32)
+    - Unpack and put in *Documents/Arduino/libraries/*
+    - (Arduino IDE) automatic installation from .zip: *Sketch/Include library/Add .ZIP library…* and specify the downloaded archive
+- Read more detailed instructions for installing libraries [here] (https://alexgyver.ru/arduino-first/#%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE% D0%B2%D0%BA%D0%B0_%D0%B1%D0%B8%D0%B1%D0%BB%D0%B8%D0%BE%D1%82%D0%B5%D0%BA)
+
+<a id="init"></a>
+## Initialization
+```cpp
+GyverBME280 bme;
+```
+
+<a id="usage"></a>
+## Usage
+```cpp
+boolbegin(void); // run with standard addresscatfish (0x76)
+bool begin(uint8_t address); // run with address
+bool isMeasuring(void); // returns true while the measurement is in progress
+float readPressure(void); // read pressure in Pa
+float readHumidity(void); // Read humidity in %
+void oneMeasurement(void); // Take one measurement and go to sleep
+float readTemperature(void); // Read temperature in degrees C
+
+void setMode(uint8_tmode); // set the mode of operation
+// modes:
+NORMAL_MODE
+FORCED_MODE
+
+void setFilter(uint8_tmode); // change the filter factor. Call before begin
+// coefficients:
+FILTER_DISABLE
+FILTER_COEF_2
+FILTER_COEF_4
+FILTER_COEF_8
+FILTER_COEF_16
+
+void setStandbyTime(uint8_tmode); // Change time between measurements. Call before begin
+// modes:
+STANDBY_500US
+STANDBY_10MS
+STANDBY_20MS
+STANDBY_6250US
+STANDBY_125MS
+STANDBY_250MS
+STANDBY_500MS
+STANDBY_1000MS
+
+void setHumOversampling(uint8_t mode); // Set up oversampling or disable humidity. Call before begin
+void setTempOversampling(uint8_t mode); // Set up oversampling or disable temperature. Call before begin
+void setPressOversampling(uint8_t mode); // Set up oversampling or disable pressure. Call before begin
+// modes:
+MODULE_DISABLE
+OVERSAMPLING_1
+OVERSAMPLING_2
+OVERSAMPLING_4
+OVERSAMPLING_8
+OVERSAMPLING_16
+```
+
+<a id="example"></a>
+## Example
+See **examples** for other examples!
+```cpp
+/*
+   A simple example showing the basic functions of measuring temperature, pressure and humidity
+*/
+
+#include <GyverBME280.h> // Including the library
+GyverBME280 bme; // Create bme object
+
+void setup() {
+  Serial.begin(9600); // Start serial port
+  bme.begin(); // If add. settings are not needed - initialize the sensor
+}
+
+void loop() {Serial.print("Temperature: ");
+  Serial.print(bme.readTemperature()); // Print temperature in [*C]
+  Serial.println("*C");
+
+  Serial.print("Humidity: ");
+  Serial.print(bme.readHumidity()); // Output humidity in [%]
+  Serial.println("%");
+
+  float pressure = bme.readPressure(); // Read pressure in [Pa]
+  Serial.print("Pressure: ");
+  Serial.print(pressure / 100.0F); // Display pressure in [hPa]
+  Serial.print(" hPa , ");
+  Serial.print(pressureToMmHg(pressure)); // Output pressure in [mmHg. pillar]
+  Serial.println("mm hg");
+  Serial.print("Altide: ");
+  Serial.print(pressureToAltitude(pressure)); // Print height in [m a.s.l. seas]
+  Serial.println("m");
+  Serial.println("");
+  delay(1000);
+}
+```
+
+<a id="versions"></a>
+## Versions
+- v1.3 - fixed bug when negative. temperature
+- v1.4 - split into h and cpp
+- v1.5 - added support for BMP280
+
+<a id="feedback"></a>
+## Bugs and feedback
+When you find bugs, create an **Issue**, or better, immediately write to the mail [alex@alexgyver.ru](mailto:alex@alexgyver.ru)
+The library is open for revision and your **Pull Request**'s!
\ No newline at end of file